If the device burned down, then you should not worry much about this, since the Data Recovery stored on it can still be restored. Most often, the hard drive controller burns out.
This happens during power surges or due to improper cable connection to the power connector. In addition, the controller may also burn out when a disk is connected or disconnected while the computer is running.
Failure of hard disk controllers can be detected as follows. Try turning on your computer with and without a hard drive. If the PC does not turn on when the hard drive is connected, then the problem is in the controller.
The electronics of the hard drive can also burn out. This usually occurs when overheating is associated with prolonged use of the computer. To repair a burnt hard drive, you need to understand how global the problem is – whether the area of the burnt elements is limited or the breakdown has spread further.
After that, you need to install a working board on the hard drive and copy all the contents of the hard drive to it. When data recovery is done, you can repair the hard drive.
All manipulations with a burnt hard drive must be carried out by a master in a service center. IT-Fecs has all the necessary equipment for repairing hard drives and recovering Twitter data from them. Contact us!